video
Niobium C-103 Plate

Niobium C-103 Plate

Niobium C-103 plate and sheet for aerospace propulsion, high-temperature vacuum structures and advanced thermal components
C-103 is a niobium-hafnium-titanium alloy commonly identified as Nb-10Hf-1Ti and UNS R04295
MH's key material feature is ultra-low oxygen control as low as 0.005% for improved ductility and manufacturing reliability
Plate, sheet, strip, foil, blanks and custom cut sizes can be evaluated according to drawing and project requirements
Applicable standards may include ASTM B654/B654M and AMS 7852 according to the required product form and purchasing specification
Custom delivery condition, surface, flatness, inspection, certification and downstream forming or machining support available

Product Introduction

Niobium C-103 Plate for Aerospace and High-Temperature Structures

Niobium C-103 plate is a rolled flat product made from a niobium-hafnium-titanium alloy commonly identified as Nb-10Hf-1Ti and UNS R04295. It is selected when engineers need a lightweight refractory alloy that combines elevated-temperature strength with useful ductility, formability and weldability. MH supplies C-103 plate, sheet and related flat products with ultra-low oxygen control as low as 0.005%, custom dimensions, project-based delivery condition and inspection support.

C-103 Niobium Alloy Plate, Sheet, Strip and Custom Blanks

Buyers searching for C-103 niobium plate, C103 sheet, Nb-10Hf-1Ti plate, UNS R04295 sheet, aerospace niobium alloy plate, rocket nozzle material or low-oxygen C-103 alloy usually need more than a catalog sheet. They need to confirm the correct standard, chemistry, oxygen level, delivery condition, thickness, surface, flatness, inspection scope and compatibility with forming, welding or machining.

What Is Niobium C-103 Plate?

C-103 is a niobium-based refractory alloy strengthened mainly with hafnium and titanium. In simple terms, it is used when pure niobium is not strong enough at elevated temperature, but the part still needs a material that can be rolled, formed, welded or machined into an aerospace or high-temperature component. The plate is normally purchased as manufacturing stock and then converted into combustion chambers, nozzle structures, heat shields, thermal components, vacuum structures or other custom parts.

Quick Technical Information
ProductNiobium C-103 plate, sheet, strip, foil, custom blanks and cut parts
Alloy IdentityC-103; commonly identified as Nb-10Hf-1Ti; UNS R04295
Applicable StandardsASTM B654/B654M and AMS 7852 may apply according to product form and purchasing specification; custom project specifications can also be evaluated.
MH Material FeatureOxygen content controlled as low as 0.005% for key C-103 projects.
Custom Options0.005-0.1mm foil, 0.13-4.76mm mainly cold-rolled sheet, 鈮?4.76-25mm plate or custom thicker plate; maximum rolling / forging width up to 650mm and maximum single-sheet length up to 6000mm, subject to thickness and project review.
Typical ApplicationsAerospace propulsion, rocket and spacecraft structures, high-temperature vacuum systems, thermal structures, formed components and advanced manufacturing.

plate

C-103 Grades, Forms and Delivery Conditions

C-103 is itself an alloy designation, not a family of multiple commercial quality grades. Plate, sheet, strip and foil describe product forms rather than material grades. For purchasing, the more important distinctions are the applicable specification, chemistry limits, oxygen and other interstitial elements, thickness, delivery condition, surface, flatness and the downstream process.

Plate / SheetStrip / FoilCustom BlanksDelivery Condition
Flat stock for structural parts, machining, forming and welded assemblies.Thinner flat products for formed, thermal or specialized component requirements.Cut rectangles, discs, profiles or near-net blanks according to drawing.Rolled, annealed, stress-relieved or project-defined condition according to the required specification and downstream process.

Available Thickness and Typical Manufacturing Route

C-103 flat products are divided by thickness because foil, sheet and plate require different rolling routes and are normally purchased for different downstream uses. Final feasibility also depends on width, length, delivery condition, flatness and inspection requirements.

Product FormThickness RangeTypical ProcessTypical Uses
Foil0.005-0.1mmPrecision thin rolling with controlled annealing and handlingUltra-thin thermal, formed and specialized aerospace components
Sheet0.13-4.76mmMainly cold precision rolling for smoother surface and useful forming ductilityStampings, high-temperature thin-wall structures, nozzle liners and thin-wall satellite thruster components
Plate4.76-25mm or custom thickerHot forging / hot breakdown rolling followed by project-specific processingStructural supports, high-temperature load-bearing bases and welded reinforcement substrates

Common and Maximum Width / Length

Width and length capability depends on thickness, rolling or forging route, flatness, delivery condition and inspection requirements. The following ranges help buyers prepare an initial RFQ; final manufacturability should be confirmed by project review.

Product FormCommon WidthCommon LengthMaximum / Special Supply
Sheet, 0.13-4.76mm200-600mm1000-2000mmMaximum rolling width 650mm; maximum single-sheet length 6000mm.
Strip, width <150mmCustom slit width below 150mmCoil delivery availableCoil diameter can be customized according to handling and application requirements.
Plate, 鈮?4.76mm300-600mm1000-2500mmMaximum rolling / forging width 650mm; maximum forged and rolled plate length 6000mm.
Billet, >25mmExtra-thick material is normally supplied as a forged billet with machined flat surfaces; length and width can be negotiated according to the available forging blank.

Common Delivery Conditions

ConditionCharacteristicsTypical Selection Logic
A - AnnealedStandard default condition; 鈮?90% recrystallization; vacuum annealing around 1050-1100掳C.Best plasticity and weldability; commonly selected for aerospace thruster chambers, formed parts and welded structures.
CW - Cold WorkedTypically 10%-30% cold deformation; higher strength and hardness with lower elongation.Used for simple high-rigidity structures that do not require significant bending or deep forming.
SR - Stress RelievedLow-temperature treatment reduces rolling stress while retaining part of the work-strengthened condition.Useful when reduced machining distortion and some retained strength are required.
Forged / Hot RolledNormally used as thick-plate or billet starting material; direct bare forged or hot-rolled finished delivery is uncommon and should be project-defined.

Available Surface Finishes

FinishSurface CharacteristicsTypical Use
BA - Bright AnnealedVacuum annealed and pickled/passivated; silver metallic appearance without thick oxide scale. Typical Ra: sheet approximately 0.8-3.2渭m; plate approximately 3.2-12.5渭m.Mainstream finish for subsequent welding, coating, brazing and general aerospace fabrication.
PickledOxide scale removed from hot-rolled plate; slightly matte surface with light rolling texture.Selected when the plate will receive further machining or surface processing.
Ground / MachinedMilled or ground plate and precision-ground sheet; Ra can be controlled to 0.4渭m or better according to project review.High-precision sealing surfaces, mating surfaces and parts requiring subsequent precision manufacturing.

Common Surface Acceptance

Finished material should be free from cracks, peeling, delamination, deep indentations, pinholes, inclusions and local heavy oxide scale. As a common project reference, scratch depth should not exceed 5% of plate thickness unless the purchasing specification defines a different acceptance rule.

Typical Thickness Tolerance Reference

The following values are common references for annealed C-103 flat products, not universal guaranteed tolerances. Final tolerance must be confirmed according to thickness, width, length, standard, delivery condition and order quantity.

Thickness RangeTypical Reference TolerancePurchasing Note
0.13-1.0mm sheetApproximately 0.04 to 0.08mmConfirm thickness measurement method, width and forming requirement.
1.0-4.76mm sheetApproximately 0.10 to 0.18mmTighter tolerance should be reviewed together with flatness and surface requirements.
Plate over 4.76mmTypically 0.2 to 0.5mmTolerance normally increases with thickness; large thickness and custom requirements should be negotiated.

Flatness and Edge Straightness

Flatness and edge straightness are evaluated according to the applicable material standard, product thickness, sheet or plate dimensions, delivery condition and purchase specification. Buyers with downstream forming, welding or precision machining requirements should identify any project-specific flatness or straightness acceptance criteria in the RFQ.

Key Material Characteristics

High-Temperature Strength with Lower Density

C-103 provides useful elevated-temperature strength while remaining lighter than several heavier refractory alloy alternatives, which is valuable for aerospace mass reduction.

Useful Fabricability

Compared with many refractory materials, C-103 can support rolling, forming, welding and machining when chemistry, oxygen and process condition are controlled correctly.

Vacuum and Inert-Atmosphere Capability

C-103 is widely used for high-temperature aerospace and vacuum structures where its thermal and mechanical characteristics can be used effectively.

Important Oxidation Limitation

C-103 oxidizes rapidly in high-temperature air. High-temperature service may require vacuum, inert atmosphere or a suitable protective coating system.

Why Low Oxygen Matters

For C-103, oxygen is not a minor paperwork item. Oxygen and other interstitial elements can affect ductility, forming behavior, weldability, fatigue performance and manufacturing reliability. A plate may have the correct alloy name but still perform poorly if its interstitial control or processing condition is unsuitable. MH's C-103 capability includes oxygen control as low as 0.005%, making low oxygen a leading purchasing and quality differentiator.

How C-103 Plate Is Manufactured

Producing reliable C-103 plate requires more than rolling an alloy ingot flat. The full route must control alloy chemistry, oxygen pickup, deformation, heat treatment, surface condition and final dimensions. The exact route depends on required thickness, delivery condition and downstream manufacturing use.

Vacuum MeltingForging / BreakdownRollingAnnealing / FlatteningInspection / Cutting
Controlled alloying and low-interstitial processing route.Break down the ingot and prepare a stable structure for rolling.Controlled thickness reduction with intermediate processing as needed.Manage ductility, residual stress, flatness and delivery condition.Check chemistry, dimensions, surface and project-specific requirements.

plate1

Why C-103 Plate Is Difficult to Manufacture

The main challenge is achieving the required chemistry, low oxygen, structure, flatness and surface condition at the same time. A poor process route can cause oxygen pickup, edge cracking, uneven thickness, distortion, unsuitable grain structure or reduced formability. The final plate must also match the buyer's downstream process, because material prepared for forming may require a different condition from material intended for machining or welded fabrication.

Chemistry and Interstitial Control

Hafnium, titanium, oxygen and other controlled elements must meet the required specification and project performance needs.

Rolling and Heat Treatment

Rolling reduction and annealing affect strength, ductility, grain structure, residual stress and downstream forming behavior.

Flatness and Surface Quality

Thin or large flat products can distort, while surface defects may remain visible or become failure points during forming or welding.

How Purchasing Engineers Can Judge C-103 Plate Quality

Good C-103 plate is not defined only by a clean-looking surface. The buyer should compare the material certificate, chemistry, oxygen and interstitial control, applicable standard, delivery condition, thickness consistency, flatness, surface condition, mechanical test requirements and full traceability. The correct acceptance criteria depend on whether the plate will be formed, welded, machined, coated or used directly in a high-temperature assembly.

ChemistryDimensionsCondition / SurfaceDocumentation
Verify alloying elements, oxygen and other required interstitial or impurity limits.Check thickness, width, length, flatness, edge and custom blank geometry.Confirm delivery condition, surface defects, scale, contamination and downstream suitability.Confirm material certificate, traceability, test reports and specification compliance.

Routine Inspection and Aerospace Project Options

Inspection scope should be defined by the applicable standard, purchase order and final application. Routine material release normally focuses on chemistry, room-temperature mechanical properties, hardness, dimensions and surface. Aerospace or high-reliability projects may require additional metallography, bending, nondestructive testing, gas analysis or high-temperature verification.

Inspection GroupTypical ItemsPurchasing Note
Chemistry and Gas ContentNb, Hf and Ti alloying elements; C, N, O, H, Fe, Si, W, Mo and other required impurities; melt sample and/or finished-product verification according to the order.High-temperature parts should clearly define oxygen, nitrogen and hydrogen requirements.
Mechanical PropertiesRoom-temperature tensile strength, 0.2% proof/yield strength and elongation; Vickers hardness; bending test when required.Annealed reference values may include tensile strength around 415MPa and elongation 鈮?25%, but acceptance values must follow the order specification.
HardnessVickers hardness according to thickness and delivery condition. Typical reference ranges: annealed sheet approximately HV100-160; cold-worked material approximately HV180-240.Hardness is useful for confirming condition consistency, but should not replace tensile or chemistry requirements.
Dimensions and SurfaceThickness, width, length, diagonal, full visual surface inspection, and flatness / edge straightness according to the applicable standard and purchase specification.Define measurement method and critical locations for precision blanks or formed-part stock.
Aerospace / High-Reliability OptionsMetallographic grain inspection, 3t bend test for annealed material, UT for thick plate, PT for surface microcracks, precision O/N/H analysis and short-time high-temperature tensile testing around 1093掳C when specified.These tests should be stated in the RFQ and purchase order because they affect sampling, lead time and cost.

Quality Documents

EN 10204 3.1 manufacturer inspection documentation can be supplied as the normal quality-document route. EN 10204 3.2 or third-party witnessed inspection can be arranged when specified before quotation and order confirmation.

Typical Applications

C-103 plate is normally converted into a high-value component. Its application depends on geometry, service atmosphere, temperature, coating strategy and manufacturing route.

Aerospace propulsion: combustion chambers, nozzle structures, thruster components and other high-temperature propulsion hardware.Space and thermal structures: heat shields, high-temperature structural parts and lightweight thermal components.
Vacuum and inert-atmosphere systems: components that use C-103's high-temperature capability while limiting oxidation exposure.Advanced manufacturing: formed, welded or machined prototypes, custom aerospace parts and feedstock for further processing.

Packing, Handling and Storage

C-103 plate should be protected from surface damage, contamination, moisture and handling distortion. Packing should match plate thickness, size, surface requirement and shipping route. Thin sheet or precision-cut blanks may require separators, edge protection, rigid support and protected packaging to preserve flatness and surface condition.

What to Send for Quotation

Required standard, specification or project documentThickness, width, length, cut shape and quantityDelivery condition, surface, tolerance, and any flatness / edge straightness requirements beyond the applicable standard
Oxygen, chemistry, mechanical testing and certification needsDownstream process: forming, welding, machining, coating or additive manufacturingApplication temperature, atmosphere, drawing and inspection requirements

Related Product Pages

These existing MH pages help buyers compare C-103 alloy capability, related niobium materials and downstream product forms.

C-103 Niobium AlloyNb-521 AlloyNiobium Foil / Strip
Niobium Sheet / PlateRefractory Metals & Special AlloysContact MH Engineering Team

FAQ

Is C-103 a grade of pure niobium?

No. C-103 is a niobium-based alloy strengthened mainly with hafnium and titanium. It is commonly identified as Nb-10Hf-1Ti and UNS R04295.

Which standards are commonly used for C-103 plate and sheet?

ASTM B654/B654M and AMS 7852 are commonly relevant to C-103 flat products. The purchase order should identify the required standard, revision, product form and project-specific requirements.

Why is MH's 0.005% oxygen capability important?

Low oxygen helps support ductility, forming, welding and manufacturing reliability. For critical C-103 projects, oxygen and other interstitial elements should be reviewed as part of the material certificate and acceptance requirements.

Can C-103 plate be used directly in high-temperature air?

C-103 has strong high-temperature capability, but oxidation in high-temperature air is a major limitation. The final design may require vacuum, inert atmosphere or a suitable protective coating system.

Can MH supply custom cut blanks or formed C-103 parts?

Yes. MH can evaluate custom plate dimensions, cut blanks, forming, machining and drawing-based component requirements according to material condition, geometry, tolerance and quantity.

Request Niobium C-103 Plate

Send your required standard, thickness, width, length, quantity, delivery condition, oxygen requirement, inspection scope and downstream application. MH can review the specification and recommend a practical C-103 plate supply and manufacturing route.

Contact Us

 

Hot Tags: niobium c-103 plate, China niobium c-103 plate manufacturers, suppliers, factory, Nb-10Zr, Nb-5Zr, Nb-752, Niobium Rod Bar, Niobium Sheet Plate, Niobium titanium Capillary

Send Inquiry

whatsapp

Phone

E-mail

Inquiry

Bag