Aviation Filter and Element

AEROSPACE FILTRATION & CUSTOM FLUID-CONTROL COMPONENTS

Aviation Filters, Filter Elements & Monitoring Accessories

MH develops and manufactures custom filter assemblies, filter elements, pressure indicators, switches and related accessories for aviation fuel, lubrication, hydraulic, cooling, water and pneumatic systems. We translate your fluid conditions, performance requirements and installation space into a component design, manufacturing route and verification plan.

Discuss Your Filtration Project

Since 1955   /   Aerospace fluid-control experience   /   Custom design & manufacturing   /   Functional verification

VALVE

Filter assemblies, standalone elements and monitoring accessories: different components for different system requirements.

Choose What Your System Needs

Complete Filter Assemblies

Fuel filters, lubricating oil filters, hydraulic filters, coolant filters, water filters and air and gas filters. Housings, elements, ports and optional bypass or indication functions are matched to the circuit.

Standalone Filter Elements

Fuel, lubricating oil, hydraulic oil and gas filter elements, including fine-filter, coarse-protection and bidirectional structures. Stainless steel mesh and sintered stainless steel fiber felt are available within the product range.

Monitoring & Filter Accessories

Differential pressure indicators and switches, system-pressure switches, filter bypass valves, magnetic oil drain plugs and metal debris detectors. Select local indication, remote signaling or a combination according to the maintenance and control strategy.

The products below are examples of the available range. MH also supports other interfaces, filtration requirements and working environments through custom development. A reference product is a starting point, not a limit on the capability we can offer.

First 1234 Last 1/4

A Filter Must Fit the Circuit, Not Just the Space

A micron rating alone does not define a usable filtration component. Pressure drop depends on flow and fluid condition; the housing must withstand the circuit pressure; and an element, indicator and bypass valve must work together without conflicting settings. MH addresses these requirements during design, rather than treating the filter as an isolated part.

Selected Technical Examples

Representative configurations combine compact packaging, defined filtration performance and pressure or temperature capability. MH also develops new configurations around the requirements of your circuit. Each specification below belongs to the named model.

High-pressure hydraulic assembly
GYL-060A/B
Working pressure: 42 MPa; burst pressure: 83 MPa; working temperature: -40 to +121°C. Bypass opening: 0.69 ± 0.07 MPa; indication: 0.52 ± 0.05 MPa.
Compact hydraulic element
YLX45-0
5 µm; filtration ratio β5 ≥ 75 as specified in the source data; working pressure: 23 MPa; temperature: -55 to +135°C; mass: ≤20 g.
PAO coolant filter
ZYL020-1
PAO coolant; 5 µm; 20 L/min; -55 to +130°C. Working pressure: 1.5 MPa; stated maximum pressure: 21 MPa. Differential-pressure indication: 0.22 ± 0.022 MPa.
Compact nitrogen filter
QL610-0
10 µm; 40 MPa working pressure; -40 to +50°C; mass: ≤50 g. Stated proof pressure: ≥60 MPa; burst pressure: ≥80 MPa.
High-flow fuel element
LX1500-1
Aviation fuel; working pressure: 1.1 MPa; maximum flow: 5,000 L/h; environmental temperature: -55 to +150°C; stated flow resistance: ≤0.2 MPa.
High-pressure kerosene element
RYLX850-1
50 µm; working pressure: 55 MPa; medium temperature: -35 to +110°C. Pressure drop: ≤0.3 MPa at 100 L/min and ≤1 MPa at 220 L/min.
High-temperature indicator
GWXHQ(V)5
4050 aviation lubricating oil; -30 to +220°C; working pressure: 21 MPa; signal differential pressure: 0.5 ± 0.05 MPa; manual reset.

Interfaces Engineered for the Installation

A compact filter must be accessible for connection, sealing, element removal and indicator inspection. Mounting faces, port orientation, thread specification, O-ring grooves and the service envelope are part of the component definition.

VALVE draft

GYL-060A/B outline example. The dimensions and configuration shown belong to this model; custom projects can use different mounting and interface arrangements.

For an existing assembly, MH can work from an authorized drawing or a defined reference. For a new system, your medium, pressure, flow, temperature and installation requirements can be the starting point for custom design.

Why OEM Buyers Work with MH

Aerospace Background Since 1955

MH combines long-term aerospace manufacturing experience with more than 20 years of fluid-control OEM service experience. The focus is on reliable components, clear engineering communication and consistent repeat supply.

Design Through Verification

Supply can include requirement definition, component design, precision manufacturing, special processes, assembly and testing. An existing catalog configuration is not the only route to a solution.

Precision at the Functional Interfaces

CNC turning and milling, micro-hole and thread machining, sealing-feature control and material/surface-process selection support filter bodies and small functional components. ZEISS coordinate measurement and other dimensional inspection resources support verification of the finished geometry.

Functional and Environmental Testing

Available verification resources include sealing, pressure resistance, flow resistance, filter integrity and high/low-temperature testing. Test conditions and acceptance criteria are defined for the selected product and project.

Aerospace-oriented quality systems and CNAS-accredited laboratory resources support the work, alongside ISO 9001 and AS9100 quality-management capability. Explore MH manufacturing and testing capabilities.

Match the Component to the Application

Fuel & Lubrication

Filter assemblies and elements for aviation fuel and lubricating oil, with pressure or clogging indication where needed. Oil condition, temperature, permissible pressure drop and maintenance access guide the configuration.

Hydraulics & Servo Circuits

High-pressure assemblies, compact fine-filter elements and bidirectional protection structures for pumps, valves and actuators. Installation features and element differential-pressure strength need attention alongside filtration grade.

Cooling & Pneumatics

PAO and other defined coolant circuits, compressed-air and nitrogen systems, and selected refrigerant or special-media filtration. Material, seal, temperature and pressure suitability are assessed together.

Water & Custom Fluid Equipment

Aircraft water filtration and custom components for fluid-control equipment and test installations. Water-system functions, including particulate filtration or residual-chlorine reduction, follow the selected product configuration.

From Operating Conditions to a Defined Component

1. Define the requirement Identify the medium, temperature, pressure, flow, filtration target, allowable pressure drop, interfaces and quantity. A drawing, reference part or installation sketch is useful when available.
2. Develop the configuration Select or design the body, element, flow direction, seals and installation features. Define any bypass, indication, pressure-switch and reset requirements together.
3. Manufacture & verify Produce and inspect the component against the agreed specification. Confirm the required pressure, leakage, flow, filtration or environmental verification for the project.
4. Support repeat supply Maintain the agreed configuration and documentation for repeat orders. Engineering changes and acceptance requirements remain tied to the product specification.

Aviation Filtration FAQ

Can MH design a filter without a complete customer drawing?

Yes. Custom development can start from working conditions, required performance and installation interfaces. A drawing is helpful, but a new design can be developed from a sufficiently defined system requirement.

Can I buy only an element, indicator or bypass valve?

Yes. MH supplies complete filter assemblies as well as standalone elements and related monitoring or bypass components. Tell us whether the item must fit an existing housing or is intended for a new assembly.

Do the pressure and temperature examples apply to every model?

No. Each example represents a specific configuration. Working pressure, proof or burst pressure, element differential-pressure strength and temperature conditions have different meanings and are matched to the selected product.

Which media can MH support?

The range includes aviation fuel, hydraulic and lubricating oils, PAO coolant, defined water and gas duties, and selected special-media configurations. Share the exact fluid designation and temperature so the wetted parts and seals can be selected appropriately.

Can an existing filter be replaced by matching its dimensions?

Dimensions are only one part of the comparison. Flow direction, pressure drop, filtration performance, strength, seals, indicator logic and any applicable qualification requirements also need to match.

What should I send to start an inquiry?

Send the medium, temperature, working and peak pressure, flow, filtration target, allowable pressure drop, mounting dimensions and quantity. Add leakage, alarm or bypass requirements where relevant. An initial discussion can start with the information you already have.

Discuss Your Filter or Fluid-Control Requirement

Need a compact assembly, a custom filter element or a monitoring component for a demanding circuit? Share your working conditions and installation requirements with MH. We can help define the component and the verification needed for your project.

Send Your Requirements

Medium   /   Temperature   /   Pressure   /   Flow   /   Filtration & pressure drop   /   Leakage   /   Interfaces   /   Quantity

As one of the most professional aviation filter and element manufacturers and suppliers in China, we're featured by quality products and good price. Please rest assured to wholesale high quality aviation filter and element made in China here from our factory.

whatsapp

Phone

E-mail

Inquiry

Bag