Hydraulic Oil Filter Element
PRECISION FLUID FILTRATION / CUSTOM ELEMENTS
Hydraulic Oil Filter Elements for Precision Fluid Equipment
MH designs and manufactures hydraulic oil filter elements for equipment manufacturers, including miniature and compact metal elements, fine-filtration configurations and bidirectional safety filters. Our custom supply combines the filtering section with supports, end fittings and precision installation interfaces.
For custom metal filtration, MH offers sintered stainless steel wire mesh and sintered stainless steel fiber felt solutions, developed around the fluid, filtration target, available space and flow-pressure-drop requirement. Woven mesh and other supported filter-media configurations remain available for different duties.
YLX45-0: a compact configuration with an equipment-specific threaded interface.
Choose the required function first: fine filtration addresses a defined particle-retention target; a safety element provides the specified local protection in its intended flow path. Browse the configurations below or send a drawing for a custom design.
Different Hydraulic Duties Need Different Elements
| Reference | Model-specific duty |
|---|---|
| YLX45-1 | Fine-filtration element: 5 µm filter-material rating; 28 MPa working pressure; No. 15 aviation hydraulic oil; -10 to +80 °C. Flow resistance: no more than 0.1 MPa at 10 L/min; inside-to-outside flow. |
| LX750-2 | Safety element: 50 µm, 21 MPa working pressure, -40 to +140 °C and bidirectional flow. The specified media include hydraulic oils and other fluids listed for this model. |
| LX775-0 | Safety element: 75 µm, 21 MPa rated working pressure, -54 to +135 °C and bidirectional flow. |
| LX7200-0 / -1 / -2 | Safety elements: 200 µm, 21 MPa rated working pressure, -54 to +135 °C and bidirectional flow. Select the installation configuration for the receiving equipment. |
These are separate catalog configurations, not a single specification for the whole range. Define housing or circuit working pressure separately from the element differential-pressure and strength requirements.
LX7200 series: safety-filter configurations with model-specific installation features.
LX750-2: a bidirectional safety element for the fluids specified for this model.
For the additional LX7200-3/-4/-5 configurations, see 200 micron bidirectional safety filter elements. Their model-specific flow requirements are addressed on that product page.
Metal Media, Supports and Precision Interfaces
Sintered wire mesh, sintered metal fiber felt and woven wire mesh are different filter-media choices. MH matches the selected medium to the support structure, connections and sealing arrangement rather than treating the stainless steel designation as a complete specification.
Our wider element range also includes composite-fiber and resin-impregnated-paper configurations. Media construction, fluid compatibility and verification requirements are defined for the selected element or custom design.
Small components require attention to the end features as well as the filtering section. Locating diameters, threads and seal interfaces must fit the receiving part; the supported filter layer must address the specified flow and differential-pressure duty. This is especially relevant when an element protects precision components with small flow passages.
Precision manufacturing supports locating features, end fittings and sealing interfaces for custom components.
Define Filtration and Acceptance Together
Specify the particle-retention target and its rating basis, required flow, oil temperature or viscosity, allowable pressure drop and element strength requirements. A micron rating alone does not define filtration efficiency, and working pressure alone does not establish allowable pressure across the filter layer.
Flow-resistance verification is defined for the specified fluid, temperature and flow rate.
MH supports drawing-based manufacture and development from working conditions, with material and dimensional inspection, flow-resistance and integrity verification, pressure and sealing checks, and project-specific documentation. Test methods and acceptance records are agreed for the supplied component.
Can MH make an element for a non-standard installation?
Yes. Send the installation envelope, mating features and operating requirements. MH can develop the filtering component and precision end interfaces, or manufacture to your controlled drawing.
Can the same shape use either sintered medium?
MH can develop sintered wire mesh or fiber-felt solutions for an appropriate custom duty. Media selection, support and performance requirements form part of the design; an alternative medium is not automatically an interchangeable version of an existing catalog element.
Which references should we compare before ordering?
Start with the required function, installation drawing and fluid conditions. The YLX45-1 product page covers its compact 5 micron configuration. For a new component across different fluids, use our custom stainless steel filter element service.
Send Your Drawing or Working Requirements
Share the medium, temperature, working pressure, flow, allowable pressure drop, filtration target, installation dimensions and quantity. Include leakage, strength and inspection requirements where defined. You can begin with an installation sketch or the equipment problem you need to solve.
As one of the most professional hydraulic oil filter element manufacturers and suppliers in China, we're featured by quality products and good price. Please rest assured to wholesale high quality hydraulic oil filter element made in China here from our factory.
Multi media High pressure Hydraulic Oil Filter Element, 201 m Hydraulic Oil Filter Element For Multi Media Compatibility, hydraulic oil filter element









