Micro Hydraulic & Pneumatic Valves
MICRO VALVES / COMPACT FLUID CONTROL / CUSTOM ENGINEERING
Custom Micro Valves & Fluid Control Assemblies
MH designs and manufactures precision hydraulic and pneumatic valves for aerospace, fuel systems, downhole tools, gas handling and demanding industrial equipment. Our portfolio combines miniature valve structures, compact control components and application-specific assemblies.
Bring us an installation interface and performance specification for complete valve development, or a released drawing for build-to-print manufacturing. Design, precision machining, assembly and functional validation can be covered within the same program.
20+ years of fluid-control OEM experience / Prototype to repeat production / Complete valves, assemblies and precision parts
Email: info@xacmfg.com
Compact valve products, including cartridge, manual and electrically operated structures.
Choose a Valve Family
Start with the required control function. Each family below leads to existing product examples; flow restrictors and throttle designs are also available for small-flow circuits.
Shut-off, Charging & Drain ValvesManual isolation, charging, venting and draining. |
Check ValvesOne-way flow, compact cartridges and pilot-operated designs. |
Safety ValvesPressure protection for gas, liquid and low-temperature circuits. |
Pressure Relief ValvesHydraulic pressure limiting and controlled bypass. |
Directional Control ValvesFlow-path switching, distribution and shuttle functions. |
Pressure RegulatorsPressure reduction for gas, oil, fuel and water circuits. |
Solenoid ValvesTwo-way and three-way switching, pilot valves and manifolds. |
Fuel Filler CapsFuel tank filler interfaces and sealing components. |
Refueling Control AssembliesMechanical refueling control and custom valve assemblies. |
Fuel Tank Vent & Transfer ComponentsFloat valves, transfer valves and jet-sensing components. |
Three Ways to Work with MH
| Your Starting Point | MH Supply Scope |
|---|---|
| Interface + performance requirements | Internal valve design, prototype manufacture, assembly and validation. Internal part drawings are not required to begin. |
| Valve or assembly drawings | Build-to-print manufacture, component matching, assembly and functional tests. |
| Precision part drawings | Valve bodies, seats, spools, plungers and other critical machined components. |
The product list below illustrates available structures and manufacturing experience. Other geometries and operating requirements can be developed around your equipment.
Engineering Scope at a Glance
The range includes miniature flow-control elements as well as larger directional and refueling assemblies. Select a configuration around the fluid, available pressure differential, installation space and control function.
| Selection Area | Portfolio & Engineering Scope |
|---|---|
| Valve structures | Poppet, needle, ball, spool, cartridge and pilot-operated valves; two-way and three-way solenoid arrangements. |
| Compact bore examples | 0.4-10 mm in many compact designs; smaller micro-orifice examples and larger control assemblies are also represented. |
| Pressure classes | Low-pressure vent and pneumatic circuits; fuel and gas examples around 0.1-3.5 MPa; hydraulic examples at 6-21 MPa and 25-40 MPa; selected high-pressure designs. |
| Temperature capability | Typical compact designs around -55 to +135 °C; cryogenic examples down to -196 °C; high-temperature micro hydraulic valve design, manufacture and validation for +200 °C duty; selected hot-gas examples up to +250 °C. |
| Electrical configurations | 5 V DC micro-valve examples; 24 V and 28 V DC designs, with operating voltage and current defined by the individual model. |
| Working media | Hydraulic oils, aviation fuels, lubricating oils, air, nitrogen, helium, water and selected cryogenic fluids. |
| Materials & seals | Stainless steel, aluminum alloy, titanium alloy, brass and specified materials; seal options include FKM, PTFE, PEEK, EPDM and NBR, selected for the fluid and temperature. |
Dimensions, pressures and temperature limits belong to the individual design. The following examples show different parts of the portfolio; they are not a universal rating for every valve.
Representative Valve Designs
| Design | Model-Specific Example | Engineering Relevance |
|---|---|---|
| Micro helium control | EP6501-00: 0.1 mm bore, 22.5 MPa working pressure, 5 V DC, normally closed, two-way. | Miniaturized gas control with defined power and installation requirements. |
| Cartridge check valve | DXF-21: 2 mm bore, 6.90-20.60 MPa working pressure, 13.80-55.20 kPa cracking pressure, mass ≤3 g. | A compact one-way valve for fuel and hydraulic media specified for the model. |
| Cryogenic isolation | DY-JZF-1: 10 mm bore, 4 MPa working pressure, -196 to +70 °C. | Low-temperature shut-off for the cryogenic media specified for this design. |
Examples of valve structures and installation formats. The image illustrates the wider portfolio; model-specific values are identified separately in the table above.
Precision Manufacturing Behind Valve Performance
A small valve depends on the interaction of its seat, moving element, spring, flow passages and seals. MH combines precision component manufacture with assembly controls and functional inspection to support sealing consistency, controlled opening pressure and repeatable operation.
| Engineering Focus | Manufacturing & Verification Support |
|---|---|
| Sealing & leakage | Seat geometry, sealing-surface finishing, plunger alignment and internal/external leakage testing. |
| Pressure & flow consistency | Spring force matching, cracking and reseat pressure checks, flow resistance and pressure-drop measurement. |
| Fit & motion | Precision turning, multi-axis milling, grinding, honing and EDM for valve bodies, spools, bores and locating features. |
| Clean passages & assembly | Burr control in small bores and cross-holes, cleaning, contamination-sensitive assembly and particle inspection. |
| Material stability | Material verification, heat treatment and surface treatment coordinated with sealing, wear and corrosion requirements. |
| Program documentation | Drawing revision control, first-article and dimensional inspection, material traceability and batch quality records. |
Manufacturing and inspection activities supporting precision functional components.
Testing, Quality & OEM Experience
MH brings an aerospace manufacturing background dating to 1955 and more than 20 years of OEM experience in aerospace hydraulic and pneumatic valve components and aviation filter elements. ISO 9001 and AS9100D quality systems support controlled manufacturing, inspection and traceable delivery.
| Test Group | Available Verification |
|---|---|
| Pressure, flow & sealing | Hydraulic pressure, pressure resistance, burst tests where specified, pneumatic leakage, helium leak detection, flow resistance, cracking and reseat pressure. |
| Functional performance | Opening/closing checks, assembly operation, electrical actuation and cycling against the agreed acceptance criteria. |
| Environmental performance | High/low temperature, thermal shock, vibration, shock and corrosion-related testing for the defined product program. |
| Dimensional & material inspection | CMM, optical measurement, surface roughness, industrial endoscopy, spring force and material inspection. |
Testing resources for pressure, environmental and functional verification. Test conditions and acceptance records follow the product program.
Match the Valve to the Equipment
These equipment groups use different control functions. The starting point is the operating duty and integration interface, rather than a generic valve size alone.
| Equipment / System | Relevant Valve Functions |
|---|---|
| Civil aviation fuel, lubrication & hydraulics | Shut-off, drainage, check, pressure protection, regulation and electrically controlled switching. |
| MWD/LWD, RSS & downhole tools | Custom pressure relief, hydraulic switching and solenoid-pilot development for defined interfaces and downhole operating conditions. Explore MWD & downhole components. |
| Precision gas & test instruments | Small-volume switching, charging/exhaust, pressure reduction and low-cracking-pressure isolation. |
| Cryogenic & industrial gas equipment | Low-temperature isolation, check and pressure protection. |
| Hydraulic test benches & industrial equipment | Sampling, pressure limiting, manual isolation, throttling and directional control. |
| Fuel tanks, refueling & coolant circuits | Fuel tank venting and transfer, mechanical refueling control and coolant flow-path switching. |
From Requirement to Repeat Supply
| Stage | Work Covered |
|---|---|
| 1. Define the function | Review the interface or drawing, media, pressure, temperature, flow, leakage, electrical duty and acceptance requirements. |
| 2. Develop or industrialize | Design internal structures where needed, review manufacturability, select materials and plan the critical processes. |
| 3. Manufacture & assemble | Produce precision components, control sealing and sliding interfaces, clean and assemble the valve. |
| 4. Verify & document | Inspect dimensions and materials, test the agreed functional characteristics and prepare product records. |
| 5. Repeat production | Maintain revision control, batch traceability and agreed inspection for continuing OEM supply. |
OEM Valve Questions
Can MH develop a valve if we only have the interface and performance requirements?
Yes. Supply the installation envelope, port/interface definition, working medium, pressure, temperature and operating sequence. MH can undertake the internal design, manufacture, assembly and validation; internal component drawings are not a prerequisite.
Can we order only the critical machined parts?
Yes. Valve bodies, seats, spools, plungers and related components can be manufactured from your drawings. Finished assemblies and complete valve development are separate supply options.
Are all valve types available at every pressure and temperature shown here?
The figures describe different product examples and engineering capabilities. Each valve is specified with its own medium, pressure, temperature, electrical conditions and acceptance criteria. The coldest, hottest and highest-pressure figures are not a combined rating.
What should an OEM send for a useful technical discussion?
Send a drawing or interface sketch, the valve function, medium, operating pressure and differential pressure, temperature, flow or leakage criteria, installation space, electrical requirements if applicable, and expected quantity. An existing specification is useful but is not required for an initial discussion.
Can MH support prototypes and repeat production?
Yes. Project support covers prototype manufacture, functional assembly, first-article inspection, pilot runs and repeat OEM supply. The test and quality documentation are defined around the product and acceptance requirements.
Start with Your Interface or Drawing
Share the valve function, installation interface, fluid, operating conditions and quantity. MH supports complete valve design and manufacture, assembly supply and build-to-print precision components.
Email: info@xacmfg.com
Related capabilities: Manufacturing capabilities / MWD & downhole tool components / Aviation filtration
As one of the most professional valves manufacturers and suppliers in China, we're featured by quality products and good price. Please rest assured to wholesale high quality valves made in China here from our factory.
















