Why the Interfaces Matter as Much as the Overall Size
A compact prosthetic transmission brings several functions into a small space: teeth transfer motion, a bore locates a shaft, and shoulders or mating faces position adjacent components. Each feature may look straightforward on its own. The manufacturing challenge is to preserve their relationships through machining, heat treatment and finishing.
MH has machined both micro gears and rotor components for prosthetic applications. These two types of parts illustrate complementary requirements: fine-pitch gear manufacture on one side, and precision machining of radial face features and integral hubs on the other.
Micro Gears: Tooth Geometry and a Miniature Shaft Connection
The micro gear work includes small steel spur gears with D-shaped and round mounting bores. A D-shaped connection introduces an additional feature to control: the flat must be correctly positioned within the bore while the bore remains accurately related to the teeth.
In this class of component, the drawing and 3D model serve different purposes. The drawing defines tolerances, datums, material condition and acceptance requirements; the model helps communicate the detailed tooth geometry and local transitions. Reviewing both avoids treating the gear outline and mounting hole as independent shapes.
Low-tooth-count gears can have pronounced root transitions. These deserve attention during profile interpretation, tooling selection and edge finishing. The useful question is whether the specified working flanks and roots can be reproduced and inspected consistently.
Rotors: Radial Face Features, Thin Sections and an Integral Hub
The prosthetic rotor work combines a disc-shaped body, radial features around the face and a projecting central hub. Its manufacturing requirements differ from those of an external spur gear. Tool access, support of the disc and the relationship between face geometry and central interfaces all influence the process route.
For this rotor work, MH uses MAZAK machining equipment. Process planning connects the radial features with the hub, bore and end connection rather than considering each machining operation in isolation. The objective is a component whose features remain consistent with the assembly datums.
Two Components, Different Inspection Priorities
| Component | Features to define | Inspection priorities |
| Micro spur gear | Working tooth flanks, root transitions, face width and mounting bore | Specified gear geometry; bore size and flat position; gear-to-bore relationships |
| Precision rotor | Radial face features, disc section, hub, bore and connection details | Feature dimensions and spacing; face and hub alignment; drawing-defined geometric tolerances |
The appropriate measurement method depends on the feature size, datum structure and specified characteristic. A tooth-profile requirement, a D-bore fit and a face-alignment requirement call for different measurement considerations. An agreed inspection plan makes those expectations clear before production.
Heat Treatment Must Be Considered Before the Final Cut
Steel gears and rotors may require a defined hardness or surface condition. Heat treatment can change dimensions and geometry, which makes the sequence of operations especially important for small bores and thin sections.
The process route should identify which surfaces establish the datums, which features need finishing in the final material condition, and which dimensions must be checked after treatment. Hardness and dimensional accuracy are connected manufacturing requirements.
Fine Deburring Is a Geometry-Control Task
A residual burr at a tooth end, groove exit or bore entrance can interfere with assembly or leave loose material. Excessive edge rounding can also damage a functional profile. Detailed finishing therefore needs a defined target: remove unwanted material while retaining the permitted edge form.
MH uses magnified observation for fine edge work. The workstation shown here demonstrates this finishing capability. For a specific component, attention is directed to the edges and intersections identified by the drawing and manufacturing route.
Purchasing specifications are clearer when they state permitted edge breaks, functional surfaces that must be preserved, and burr acceptance requirements. A general instruction to "deburr" gives less guidance than a defined edge condition.
Repeatability Includes Handling and Production Management
Miniature components need protection between operations as well as during machining. Thin edges and small teeth can be damaged by uncontrolled contact, mixed parts or unsuitable handling.
Visible production management and organized work areas support clear instructions, identification and orderly movement through operations. For repeat orders, the manufacturing plan should retain the agreed drawing revision, process requirements and inspection basis so successive batches are assessed consistently.
What to Include in a Prosthetic Component RFQ
A useful RFQ connects the part geometry to the way the component will be mounted and accepted. Include the following information:
| Technical package | Dimensioned PDF and STEP model, with the applicable revision |
| Gear or face-feature definition | Tooth standard and profile data, or the detailed radial feature geometry |
| Material and delivered condition | Alloy, hardness, heat treatment, coating and surface finish |
| Critical interfaces | Mounting fits, flats, datums, runout and mating-component information |
| Acceptance and supply | Inspection records, edge criteria, initial and repeat quantities, identification and packaging |
If only some of this information is available, start with the current drawing and explain the intended mating interfaces. This creates a practical basis for identifying the remaining component requirements.
Connecting Micro Gear Manufacturing With Precision Machining
The shared requirement across these parts is control of small functional features in relation to their installation interfaces. MH's experience with both prosthetic micro gears and rotors supports a manufacturing discussion that covers tooth geometry, complex machined features, material condition and detailed finishing.
Explore MH's custom micro gear manufacturing and 5-axis machining capabilities for related component requirements.
For a prosthetic gear or precision machined component, share your drawing, material condition and quantity requirements with MH.
Discuss Your Prosthetic Component
Further reading: FAULHABER on drive systems for prosthetics and exoskeletons.




