PRECISION FLUID SYSTEMS · COMPACT METAL FILTRATION
Miniature Bidirectional Safety Filter Elements - LX7200
LX7200-3, -4 and -5 place a 200 µm safety screen inside a compact fluid-control component. Their tapered metal filtering sections, locating features and retaining interfaces are designed for confined installation spaces in fuel and hydraulic circuits. Bidirectional flow capability supports component duties that include flow reversal.
Compact safety-element configurations for integration into a mating component.
A Small Element with a Specific Protection Duty
Local safety screening intercepts larger particles before they reach a sensitive passage or component. The useful specification combines particle size, available flow area, structural support and secure retention. For these LX7200 configurations, the 200 µm grade defines coarse protection within the circuit's wider filtration arrangement.
The conical envelope uses the space projecting into the receiving cavity. Clearance around that surface and the location of the surrounding ports influence how fluid reaches the screen. The mating component therefore forms part of the filtration design.
Keep Each Model's Flow and Interface Together
| Model | Specified flow | Grade / direction |
|---|---|---|
| LX7200-3 | 18.925 L/min | 200 µm / bidirectional |
| LX7200-4 | 37.85 L/min | 200 µm / bidirectional |
| LX7200-5 | 6.3 L/min | 200 µm / bidirectional |
The three configurations specify a medium temperature of -40°C to +140°C and a destruction/collapse pressure value of 7,500 psi. The pressure-strength figure describes a separate requirement from circuit working pressure. Select the model suffix with its installation drawing and specified flow duty.
Engineering the Screen-to-Component Fit
For a compact safety element, a small mismatch at the retaining interface can change insertion depth, seating contact or flow clearance. MH addresses the tapered screen, end connection and mounting features together so the element can be manufactured and inspected against the receiving component.
The design review follows three relationships: the screen envelope to the cavity, the mounting feature to the seat, and the supported filter section to the forward and reverse flow paths. Dimensional inspection checks the locating and retaining features; component verification addresses the agreed pressure and environmental requirements.
Vibration testing supports evaluation of component mounting and structural integrity under the specified environmental test conditions.
Two Sintered-Media Routes for Custom Miniature Elements
MH develops miniature metal filtration components using sintered stainless steel wire mesh and sintered stainless steel fiber felt. These routes allow the filter layer, supporting structure and precision end features to be configured around an equipment manufacturer's fluid-control assembly.
Sintered Stainless Steel Wire Mesh
A bonded mesh structure provides the basis for a defined filtering layer and supporting layers. In a custom safety-element design, mesh selection and forming are considered with the available surface area, connection to the end fitting and resistance to the specified flow loading.
Sintered Stainless Steel Fiber Felt
A porous fiber network provides another filter-layer construction for a custom element. The selected felt, support arrangement and joining method are developed together to meet the filtration target and flow-resistance allowance within the available envelope.
For a new drawing variant, the media route is selected with the component design. The ordered model specification defines the material, filtration requirement and acceptance checks.
Fluid Compatibility Starts with the Exact Designation
Listed media for LX7200-3/-4/-5 include Jet Fuel No. 3, mineral-based hydraulic oil, phosphate-ester hydraulic oil, blue hydraulic fluid and diesel. Identify the actual fluid and operating temperature so the filtering section, end fitting and any mating seals can be considered as a complete material combination.
Bring the Receiving Cavity into the Enquiry
For an existing component, send the full model suffix and a section drawing showing the seat, retaining interface and surrounding passages. For a new assembly, add the space available for the tapered screen, the flow duty in each direction and the acceptable pressure drop. These details let MH connect a miniature filtering structure with the component's actual operating task.
Discuss a compact safety-filter design or view hydraulic filter element configurations.
Hot Tags: 200μm hydraulic oil filter element, China 200μm hydraulic oil filter element manufacturers, suppliers, factory, 15 Aviation Hydraulic Oil Filter Element, 201 m Hydraulic Oil Filter Element For Multi Media Compatibility, 200 m Hydraulic Oil Filter Element, 75 m Hydraulic Oil Filter Element, hydraulic oil filter element, Multi media High pressure Hydraulic Oil Filter Element















